Michelin Classic Tyres

Michelin offers a range of classic car tyres which will fit a number of vehicles manufactured between the late Twenties and early Eighties.

Tyre sizes and designations

Load indices and speed symbols

Most tyres bear instructions for use such as the load index (number) and the speed symbol (letter). The load index indicates the maximum load per tyre. The speed symbol indicates the maximum authorised speed.

Load indexLoad per tyre (kg)Load indexLoad per tyre (kg)Speed symbolSpeed (kph)
6226575387K110
6327276400L120
6428077412M130
6529078425N140
6630079437P150
6730780450Q160
6831581462R170
6932582475S180
7033584487T190
7134585500H210
7235586515V240
7336587530W270
7437588545Y300
Load indexLoad per tyre (kg)Load indexLoad per tyre (kg)Speed symbolSpeed (kph)
88560101825K110
89580102850L120
90600103875M130
91615104900N140
92630105925P150
93650106950Q160
94670107975R170
956901081000S180
967101091030T190
977301101060H210
987501111090V240
997751121120W270
1008001131150Y300
Load indexLoad per tyre (kg)Speed symbolSpeed (kph)
1141180K110
1151215L120
1161250M130
1171285N140
1181320P150
1191360Q160
1201400R170
1211450S180
1221500T190
1231550H210
1241600V240
1251650W270
Y300
VR>210
ZR>240

tube type and tubeless

Tube type: Inner tube separate from tyre.

Tubeless: Inner tube incorporated into the tyre. Needs an air tight rim, however on vintage cars, if the rims are not air tight, we can allow the fitting of certain TL tyres with a special inner tube. When this is possible, the corresponding tube is given in the tables.

Authenticity and technological know-how

Michelin expertise

Michelin’s choice of continuous innovation and technological leadership can be found in this collection range. These tyres benefit from the progress made in grip on rubber mixings. However, the dynamic characteristics of these tyres remain entirely appropriate in association with those of the vehicles of time. Made in small production runs often by hand, these tyres call on the technical skills and the know-how of the finest craftsmen.

In keeping with the standards of the age

The technological excellence of this range goes hand-in-hand with the historical authenticity of the vehicles. These tyres, reproducing the exact configuration of the model of the time in terms of size, tread pattern and aspect ration thus ensure that the vehicle remains entirely in keeping with the period.

In this way, Michelin, by offering you tyres which are both safe and historically accurate, intend to make their contribution to safeguarding, promoting and perpetuating motoring heritage.

Tyres made for fitment of classic cars – F.I.V.A. definition of a classic car:

  • Which is at least 30 years old
  • Which is preserved and maintained in a historically correct condition
  • Which is not used as a means of daily transport
  • And which is therefore a part of our technical and cultural heritage

Cross-ply tyres with bead wires

Replacing beaded edge tyres, cross-ply tyres with bead wires formed the second generation of detachable tyres. These tyres benefited from two major innovations: the introduction of carbon black and the appearance of textile wire cords in the tyre carcass.

Increased service life

The incorporation of wires into the bead in 1925 led to an improvement in tyre retention on the rim. These tyres also benefited from two major innovations prior to their creation:

  • The introduction of carbon black in 1917 which led to a five-fold increase in tyre service life.
  • The appearance of layers of textile wire cords parallel with each other in the tyre’s carcass, which gave rise to the so-called “cable” tyre in 1919 and the “cable confort” in 1923, the first low pressure car tyre (2.5 bars 36 psi).

Michelin currently markets two products

Double rivet: “Double rivet” is in fact the name of a tread pattern which first saw the light of day with the first generation of tyres for motor cars, beaded edge tyres. This tread pattern was retained for first tyres with bead wires in 1925. This tread pattern, with its old-fashioned appearance, was truly revolutionary at the time. It was also the inspiration for the first radial tyres.

Superconfort: Resulting from research which led to even lower pressures and slower wear, Michelin brought out a very low pressure tyre in 1932, the Superconfort. 1935 saw the launch of the Superconfort Stop S the first tyre with a heavily siped tread pattern, specially designed for wet surfaces. At the time, Michelin was the only manufacturer who knew how to make this type of tyre with the famous zigzag sipes, which greatly improve safety because of the excellent grip they give. As its name suggests, the Superconfort Stop tyre offers exceptional comfort, in addition to its performance on the road.

cross-ply wired-on tyre specification sheet

Click thumbnail to enlarge

inflation pressures of cross-ply tyres

Normal use

  • Maximum speed is 150 kph (94 mph).
  • The inflation pressure has to be between 2 and 3.5 bars.
  • To get the best out of your tyres, use the pressure which corresponds to the actual (measured) load on each tyre (fully-loaded vehicle).

Special service conditions

Whenever the vehicle is to be used at speeds or with loads or pressures that are outside the above recommendations, first consult the Michelin technical department.

the revolutionary x tyre

a revolutionary construction for unrivaled performance

With its X tyre with radial casing piles, Michelin set out to conquer the world with a considerable advance in technology. Its revolutionary construction for the time had the special feature of separating the sidewall function from the crown function.

michelin innovation

The first major innovation from Michelin, the radial tyre was first marketed as the “X” tyre in 1949. At the time, Lancia was the first car manufacturer to fit the X tyre as original equipment on the Aurelia model. From 1955 onwards, radial technology became more popular and the majority of European car manufacturers opted for the radial solution. The X could be fitted to cars of very different categories, from the original and popular 2 CV or Beetle to the fascinating Mercedes 190SL or Facel Vega.

radial technology

The advantages of the radial tyre compared with the cross-ply tyre could be clearly seen in all areas:

  • Greater safety (road-holding, grip, braking)
  • Economical to use (double the mileage, considerable reduction in fuel consumption)
  • Increased comfort thanks to the flexibility of the sidewalls. In the 50’s, the superiority of the X tyre was such that a number of racing drivers adopted it, although Michelin was not officially involved in any racing.

Click thumbnail to enlarge

technical information

Crossply: This cross-section shows the single-concept structure of the cross-ply tyre. From bead to bead, four layers (at least) of textile fabric extend from one sidewall to the tread, going over to the other sidewall. The sidewalls and tread are not differentiated. The detailed pictures portrays the overlapping cords. These make up a thick mass of innumerable superimposed layers which represent as many areas of friction. A consequence of this is the appearance of “shearing” motions. The longitudinal cross-section show on the bottom left-hand side illustrates the shearing effect between the superimposed layers.

Radial: One can easily see the specialisation of the functions of sidewall/casing and tread. The sidewalls are made up of single layer of textiles plies, and so are not affected by the “shearing” phenomenon. The textile layer, like the rubber layer covering it, is thin and is therefore flexible. The considerable flexibility of the sidewalls results in better handling as well as fuel savings. As for the tread, it is made rigid through a triangulation effect brought about by combining the casing layer with two layers of steel cord bracing plies (3 for the X tyre). The rigidity of the crown reduces wear of the tyres an improves road-holding.

x tyre specification sheet

xas tyre: driving precision

From its launch in 1965, the XAS remained the reference tyre until the end of the 70s. The first tyre was an asymmetrical tread pattern, the inside and outside of the XAS work differently to give the car a good balance.

asymmetrical, just like a foot is

Michelin made more progress by differentiating the many elements that form the tyre, leading to the creation of the XAS, the first tyre with an asymmetrical tread pattern. The XAS was constructed taking into account the different kinds of work done by the shoulders, sidewalls and different parts of the crown, depending on whether they are on the inside and outside relative to the car. Just like a person’s foot is asymmetrical, the inside and outside of a tyre work differently to give the car good balance and sure handling.

like running on rails

This major progress allows the XAS tyre to give:

  • Remarkable stability,
  • Exceptional road holding on bends,
  • Previously unknown level of grip in all conditions.

The first production tyre designed to run at 210km/h (131mph), its exceptional performance naturally led to the XAS being used in racing, in Formula France as from 1968, circuit racing, rallies and hill climbs.

xas tyre specification sheet

Click thumbnail to enlarge

pneu tb: a race tyre for the road

The Seventies, as motor sport technology evolved so a special tyre was required. For the amateur racer the TB in its intermediate compound form, known as the 15, provided the best compromise between a race tyre and a multi-purpose product. It returns with an additional card up its sleeve: today, the TB range is road legal.

tb 15/pb 20 (full rain tyre) tyre specification sheet

Click thumbnail to enlarge

tb 5f and tb 5r: the king of the dry road

Michelin has added TB 5 F and B 5 R. This uncompromising tyre has a semi slick tread pattern for the ultimate in dry performance. The TB 5 F has a soft compound and the TB 5 R a medium compound. These tyres are fully road legal.

tb 5f (soft) and tb 5r (medium) tyre specification sheet

Click thumbnail to enlarge

xwx tyre: pushing back the boundaries

The only radial tyre which could be fitted on the fastest cars in the world in the 70’s, the XWX gives these high speed vehicles outstanding road holding and remarkable grip.

a construction designed to reach 300kph (186mph)

The special features of the XWX mean that it gives remarkable performance, combining speed, driving pleasure and safety. The original design of its internal construction, together with its flexible carcass give exceptional comfort when travelling at very high speeds. Being a VR category tyre, the XWX can be used at speeds in excess of 20 kph (13 mph); with a maximum speed of 270 kph (155 to 186 mph).

dream cars

At the end of the 60’s, Germany and Italy were the leaders in the European motorway development programme. They were also the main producers of cars which could reach speed in excess of 200 km/h (124 mph). The wide asphalt strips and the absence of speed limits offered a privileged few the opportunity to make full use of the performance of these “super-cars” at speeds which would be unthinkable today.

  • The Lamborghini Miura (1966), Ferrari 365 (195), Maserati Ghibli (1966); de Tomaso Pantera (1970) and Porsche 911 Carrera RS (1972) were the undisputed stars, but the large German saloons like the Mercedes 300 SE 6,31 (1931) and BMW 3.0 SI (1971) also made a strong impression.
  • The French were also in the frame with the Citroen MS (1970) as were the British with the legendary Jaguar V12 E-Tyre (1970) and Aston Martin DBS (1967).

Informed observers will note that this exceptional performance was achieved on tyres of the same width as those that fit today’s very sensible saloons.

xwx – xdx tyre specification sheet

Click thumbnail to enlarge

pilot sport – sx mxx3 – ps2 – mxv3-a tyre specification sheet

Click thumbnail to enlarge

trx tyres: another revolution

the first low profile tyre

The invention of the TRX by Michelin in 1975 permitted a more even distribution of tension in the whole tyre casing, which is where the name of TR standing for “Tension Repartie” (“distributed tension”) comes from. The TRX won renown in Formula 1 racing with Renault and Prost and in the world rally championship on the Audi Quattro, 205 Turbo 16 and R5 Turbo.

the result of extensive research

For the first time, the tyre and its rim complemented one another perfectly, working as a single unit. The rim underwent a fundamental transformation, the essential characteristic of which was a flatter, lower flange. This new design of the rim and tyre bead resulted in a gradual curvature of the casing, without the “S” shaped flexing inherent in traditional designs.

for real directional control

Thanks to this innovative construction, the TRX tyre offers better directional stability and makes a great contribution to the active safety of the vehicle, thanks to its exceptional handling close to the limit, especially when cornering.

  • Remarkable grip thanks to the ideal distribution of pressure in the contact patch,
  • Excellent comfort due to increased useful flexing zone,
  • New look to the tyre/wheel assembly and the heavily sculpted tread pattern.

the era of car safety

The 70’s saw the dawn of increased awareness of the importance of vehicle safety. In many countries it became compulsory to wear seat belts and speed limits were introduced on main roads and motorways.

For the tyre, this led to improvements in grip, more precise steering, increased stability and better levels of comfort, thus avoiding excessive driver fatigue on long journeys.

This decade witnessed the advent of high performance vehicles capable of covering hundreds of miles in one go, with exceptional levels of safety and comfort, such as the BMW 7 series (1977), 5 and 3 series which followed the same trend, CX 2400 GTI (1977), 604 (1975), R30…
Sports cars also benefited from this progress. Examples were the Ferrari 308 GTS and GTB (1977) and 512 BB (1976), Alpine A310 V6 (1976), Renault 5 Turbo (1979), M 635 (1984), 205 Turbo16 (1985).

All these cars (and many others) had the Michelin TRX fitted as original equipment, and still can today, with a tyre true to that era, but manufactured using today’s techniques and materials.

For the first time, the tyre and its rim complemented one another perfectly, working as a single unit. The rim underwent a fundamental transformation, the essential characteristic of which was a flatter, lower flange. This new design of the rim and tyre bead resulted in a gradual curvature of the casing, without the “S” shaped flexing inherent in traditional designs.

for real directional control

Thanks to this innovative construction, the TRX tyre offers better directional stability and makes a great contribution to the active safety of the vehicle, thanks to its exceptional handling close to the limit, especially when cornering.

  • Remarkable grip thanks to the ideal distribution of pressure in the contact patch,
  • Excellent comfort due to increased useful flexing zone,
  • New look to the tyre/wheel assembly and the heavily sculpted tread pattern.

trx tyre specification sheet

Click thumbnail to enlarge

The TRX, a radial tyre with even tension

Is a new stage in the development of radial technique: the casing and the rim are designed together and adapted to the specific needs of the vehicle.
This tyre reconciles two mutually exclusive qualities: greater comfort (formerly the prerogative of the high, supple sidewalls) and more responsive handling (formerly the prerogative of the low, rigid sidewalls).

vintage tubes

Click thumbnail to enlarge

DOWNLOAD THE MICHELIN CLASSIC TYRES BOOKLET